Hard case IP67 125x29x13 with pre cut foam

Hard case IP67 125x29x13 with pre cut foam: built for safe storage and transport of a long airsoft replica, this rigid case helps protect your setup from impacts, dust and moisture. The 125x29x13 cm format gives generous capacity while staying practical for the trunk, the workshop or regular field travel.

Rugged protection and weather sealing

PP and fiberglass reinforced shell

The body combines polypropylene (PP) with fiberglass reinforcement to deliver a tough outer shell that resists bending and repeated handling. This construction is designed to keep the case aligned over time and to reduce the risk of damage when the case is bumped, stacked or transported frequently.

IP67 rating for dust and water resistance

An IP67 rating indicates strong protection against dust ingress and temporary water immersion. In real use, it means your gear stays better protected when traveling in rain, during wet games, or when the case is exposed to splashes and damp environments.

Dimensions and practical capacity

Internal and external measurements

• Internal size: 1220 x 230 x 100 mm
• External size: 1252 x 294 x 130 mm
• Lid depth: 30 mm
• Base depth: 70 mm
• Weight: 6.1 kg

The internal length accommodates many rifle style airsoft platforms. Depending on your foam layout, you can also store magazines, a compact optic, tools or small parts in dedicated cut outs to keep everything organized and protected.

Stability during transport

Once the foam is tailored, the contents are held firmly to limit movement inside the case. This helps prevent scratches, reduces stress on optics and keeps accessories from shifting into sensitive components during transport.

Foam layout and customization

Pre cut lower foam for a custom fit

The lower layer uses pre cut foam (cube style) so you can shape the cavity to your replica and accessories with minimal effort. Remove only the blocks you need, test fit, then refine. A snug fit is the best balance between protection and easy insertion.

Egg crate foam in the lid

The lid includes egg crate foam to provide compression and additional shock absorption when the case is closed. It also helps secure smaller items when you create matching compartments in the base foam.

Locks, latches and added security

Four locking latches

Four latches distribute closing force evenly along the edge, supporting both rigidity and sealing. A stable closure reduces the chance of accidental opening and improves confidence when the case is handled by others or transported with other gear.

Two padlock holes

Two dedicated holes allow you to add padlocks (not included) for extra security during storage or travel. Combined with the latches, this helps you keep your equipment protected and controlled.

Setup tips for best results

Cut slowly, check fit often

When shaping the foam, work gradually and verify alignment before removing too much material. A slightly tight outline reduces movement, while leaving enough space to avoid pressure on fragile parts such as sights, charging handles or external controls.

Basic care and inspection

After wet use, wipe the case and let it dry open. Periodically check the latches and keep the sealing area clean so the IP67 performance remains consistent over time.

Summary: Hard case IP67 125x29x13 with pre cut foam delivers a reinforced PP and fiberglass shell, IP67 sealing, a practical foam system (pre cut base + egg crate lid), four latches and two padlock holes for confident storage and transport.